Pisco JSC6-02AKR1/4" - 6mm Meter-Out Low Cracking Pressure Elbow Flow Control Valve

This pneumatic flow control valve regulates airflow in one direction with precision. It combines a needle valve for flow rate adjustment and an orifice check valve for unidirectional flow. The meter-out configuration controls flow from the male threaded port to the push-in fitting port. The 6 mm push-in fitting ensures effortless tubing connection, while the R 1/4" male threaded port provides a secure connection. Operating within a pressure range of 0.5 to 5 bar and a temperature range of 0 to 60°C, this valve is ideal for various applications. NBR seals enhance its suitability. Flow rate adjustment is achieved by rotating the needle to control orifice size, which can be locked with the locknut. It is important to begin adjustments from the fully closed state and avoid excessive torque to prevent deformation of the valve seat. This flow control valve is readily available in the United Kingdom.

Connection size	1/4 inch
Connection type	Outer thread conical BSPT-R, Push-in
Push-in connection	6 mm
Material	Brass
Seal material	NBR (nitrile rubber)
Max pressure difference at 20 °C (bar)	5
Vacuum (bar)	0
Min temperature (°C)	0
Max temperature (°C)	60
Valve bore (mm)	0
Wrench width (mm)	0
Min pressure difference (bar)	0.2
Diaphragm material	NBR (nitrile rubber)