Pisco JSC8-02AR1/4" - 8mm Meter-Out Elbow Flow Control Valve

This pneumatic flow control valve regulates airflow in one direction. Combining a needle valve and orifice check valve, it allows flow rate adjustment and ensures unidirectional flow. The meter-out configuration controls flow from the male threaded port to the push-in fitting port. The push-in fitting facilitates easy tubing connection using stainless steel claws. The valve operates within a pressure range of 1 to 9 bar (14.5 to 130.5 psi) and a temperature range of 0 to 60°C (32 to 140 °F). A rotatable needle adjusts the orifice size for flow rate control, with a locknut for secure adjustment. Adjustment should begin from the fully closed state, avoiding excessive torque to prevent deformation of the resin valve seat. This product is available for purchase in the United Kingdom.

Connection size	1/4 inch
Connection type	Outer thread conical BSPT-R, Push-in
Push-in connection	8 mm
Material	Brass
Seal material	NBR (nitrile rubber)
Max pressure difference at 20 °C (bar)	9
Vacuum (bar)	0
Min temperature (°C)	0
Max temperature (°C)	60
Valve bore (mm)	0
Wrench width (mm)	0
Min pressure difference (bar)	0.5
Diaphragm material	NBR (nitrile rubber)