Pisco JKL6-02B1p6IN 6mm x OUT R1/4" Angled 1.6mm Orifice Meter-In Check Valve

This one-directional elbow orifice check valve controls fixed air flow with a 1.6 mm orifice. It obstructs flow in one direction and opens in the opposite for unrestricted flow. Its cracking pressure is 0.5 bar. The meter-in configuration affects flow from male threaded to push-in fitting, while meter-out is the reverse. It features a 6 mm push-in fitting on one end and an R 1/4 inch male threaded port on the other. The push-in fitting connects tubing with stainless steel claws. Flow is regulated from push-in fitting to male threaded port. Operating pressure ranges from 1 to 9 bar, with NBR seals allowing use in temperatures from 0 to 60°C. This valve is available in the United Kingdom.

Thread	1/4 inch
Push-in connection	6 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	1.6
Wrench width (mm)	14