Watson Elbow 10mm to 3/8" Pneumatic Push-In Fitting (CTL-10-03)
This is Watson Industries Elbow pneumatic fitting that has a 10mm Push-In Fitting on one end, and a 3/8" BSP male thread on the other side with PTFE tape already conveniently applied. This is a real value proposition due to its price to quality ratio. It is very popular in the United Kingdom.
Elbow Fitting
Elbow fittings are L-shaped and allow for pressured air connection between a pneumatic device (e.g. valve, cylinder) and pneumatic tubing.
Push-In Fitting Usage
With Push-In fittings, simply place your tubing into the tube end of the fitting, and lock jaws will engage to. A gentle tug will ensure that your tubing is locked into place, rendering it suitable for high pressure usage in pneumatic systems.
To disconnect the tubing, push the release ring. This disengages the lock jaws, and the tubing is able to move freely.
Technical Specifications
| Type of Connection | Threaded to Metric Tube |
| Thread Size | 3/8" |
| Tubing Size | 10mm |
| Fluid Medium | Compressed Air / Water |
| Maximum Operating Pressure | 1.0 MPa |
| Maximum Vacuum Pressure | -100Kpa |
| Operating Temperature Range | 0 to 60 degree celsius |
| Material | Nickel Plated Brass & PBT and Nylon |
| Country of Manufacture | Taiwan |