Pisco JKL4-01B2p0IN 4mm x OUT R1/8" Angled 2.0mm Orifice Meter-In Check Valve

The Pisco meter-in elbow orifice check valve provides unidirectional air flow control. Its 2.0 mm orifice obstructs flow in one direction and allows free flow in the opposite. The valve's cracking pressure is 0.5 bar. This meter-in configuration means flow is controlled from the male threaded port to the push-in fitting port. The valve features a 4 mm push-in fitting on one side and an R 1/8 inch male threaded port on the other. The push-in fitting simplifies tubing connection, using stainless steel claws to secure the tube. Flow is metered from the push-in fitting port to the male threaded port. The valve operates within a pressure range of 1 to 9 bar and a temperature range of 0 to 60°C. Its NBR seals make it suitable for non-freezing applications. This product is available for purchase in the United Kingdom.

Thread	1/8 inch
Push-in connection	4 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	2
Wrench width (mm)	10