Pisco JKL6-02B1p4IN 6mm x OUT R1/4" Angled 1.4mm Orifice Meter-In Check Valve

This elbow orifice check valve controls the flow of fixed air in one direction. The 1.4 mm orifice obstructs flow in one direction and opens in the opposite, allowing free flow. Cracking pressure is at 0.5 bar. Meter-in configuration means flow is controlled from the male threaded port to the push-in fitting port. Conversely, meter-out configuration controls flow from the push-in fitting port to the male threaded port. The check valve features a 6 mm push-in fitting on one side and an R 1/4 inch male threaded port on the other. The push-in fitting simplifies tubing connection by securing it with stainless steel claws. Operating pressure ranges from 1 to 9 bar (14.5 to 130.5 psi) with a temperature range of 0 to 60°C (32 to 140 °F). NBR seals enhance suitability in various applications and prevent freezing. This product is available in the United Kingdom.

Thread	1/4 inch
Push-in connection	6 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	1.4
Wrench width (mm)	14