Pisco JKL8-01B0p7IN 8mm x OUT R1/8" Angled 0.7mm Orifice Meter-In Check Valve

This elbow orifice check valve is designed for fixed one-directional air flow control. Its 0.7 mm orifice allows flow in one direction, blocking it in the opposite. The valve cracks open at a pressure of 0.5 bar. The valve's meter-in configuration means flow is controlled from the push-in fitting port to the male threaded port. It features an 8 mm push-in fitting on one end and an R 1/8 inch male threaded port on the other. The push-in fitting simplifies tubing connections, using stainless steel claws to secure the tube. Flow is metered from the push-in fitting port to the male threaded port. Operating pressure ranges from 1 to 9 bar, and NBR seals allow the valve to operate in temperatures from 0 to 60°C. It is available in the United Kingdom.

Thread	1/8 inch
Push-in connection	8 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	0.7
Wrench width (mm)	14