Pisco JKL8-01B1p4IN 8mm x OUT R1/8" Angled 1.4mm Orifice Meter-In Check Valve

The Pisco meter-in elbow orifice check valve is a one-directional air flow control device featuring a 1.4 mm orifice. It obstructs airflow in one direction while allowing free flow in the opposite direction at a cracking pressure of 0.5 bar. This check valve has a push-in fitting on one end and an R 1/8 male threaded port on the other, facilitating easy tube connection with stainless steel claws. The flow is metered from the push-in fitting port to the male threaded port and can withstand operating pressures ranging from 1 to 9 bar (14.5 to 130.5 psi). Its NBR seals allow for use in temperatures ranging from 0 to 60°C (32 to 140 °F), protecting against freezing. This product is available in the United Kingdom.

Thread	1/8 inch
Push-in connection	8 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	1.4
Wrench width (mm)	14