Pisco JSC5-16-01B5/16" - R1/8" Meter-In Elbow Flow Control Valve

This pneumatic flow control valve regulates air flow unidirectionally. It comprises a needle valve for flow adjustment and an orifice check valve to ensure unidirectional flow. The "meter-in" configuration implies flow control from the push-in fitting to the male threaded port. The valve features a 5/16-inch push-in fitting for easy tubing connection and an R 1/8-inch male threaded port on the other end. The operating pressure range is 1 to 9 bar, and NBR seals allow operation within a temperature range of 0 to 60°C. A rotatable needle adjusts the orifice size for flow rate control, and a locknut secures the setting. The needle should be adjusted from fully closed to avoid abrupt actuator movement. Excessive tightening should be avoided to prevent deformation of the resin valve seat and potential alteration of flow characteristics. This product is available in the United Kingdom.

Connection size	1/8 inch
Connection type	Outer thread conical BSPT-R, Push-in
Push-in connection	5/16 inch
Material	Brass
Seal material	NBR (nitrile rubber)
Max pressure difference at 20 °C (bar)	9
Vacuum (bar)	0
Min temperature (°C)	0
Max temperature (°C)	60
Valve bore (mm)	0
Wrench width (mm)	0
Min pressure difference (bar)	0.5
Diaphragm material	NBR (nitrile rubber)