Watson Run Tee 4mm to 1/8" Pneumatic Fitting (CTD-4-01)
This is Watson Industries Run Tee pneumatic fitting that has a 4mm Push-In Fitting on two sides with a 1/8" BSP Male thread on the remaining side. This is a real value proposition due to its price to quality ratio. It is very popular in the United Kingdom.
Run Tee Pnematic Fitting
Run Tees are a type of Tee fitting whereby the male thread is on one of the far sides. This is unlike a branch tee whereby the male thread is on the middle end.
Push-In Fitting Usage
With Push-In fittings, simply place your tubing into the tube end of the fitting, and lock jaws will engage to. A gentle tug will ensure that your tubing is locked into place, rendering it suitable for high pressure usage in pneumatic systems.
To disconnect the tubing, push the release ring. This disengages the lock jaws, and the tubing is able to move freely.
Technical Specifications
Type of Connection | Thread to Metric Tube |
Thread Size | 1/8" |
Tubing Size | 4mm |
Fluid Medium | Compressed Air / Water |
Maximum Operating Pressure | 1.0 MPa |
Maximum Vacuum Pressure | -100Kpa |
Operating Temperature Range | 0 to 60 degree celsius |
Material | Nickel Plated Brass & PBT and Nylon |
Country of Manufacture | Taiwan |