Pisco F2SP2-X1010mm x Rc3/8'' Female Straight Push Fit [10 Pieces]

This female fitting connects a hose to a pipe or pneumatic component via two connection ports. Port 1 is a 10mm push-in fitting, and Port 2 is an Rc3/8 female threaded fitting. The fitting creates a straight connection between the input and output, with an unequal design in which one port is smaller than the other. The construction involves a brass housing, polyoxymethylene (POM) connection material, and an NBR seal. It operates effectively within a pressure range of up to 10 bar and a temperature range of 0 – 60 °C, and it is compatible with vacuum applications. The push-in fitting is easy to install by pushing the pneumatic tube until it stops, securing it with an internal claw. To remove it, simply push the release ring towards the fitting and pull the tubing back. It is suitable for use with Nylon, Polyethylene (PE), or Polyurethane (PU) tubing materials. Available in the United Kingdom.

Thread	3/8 inch
Push-in connection	10 mm
Connection type	Inner thread conical BSPT-Rc
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0
Max pressure at 20 °C (bar)	10
Min temperature (°C)	0
Max temperature (°C)	60
Fitting features	Vacuum, With gasket
Quality of material	Nickel-plated
Model	1-part
Length (mm)	33.7
Material connection 1	Polyoxymethylene (POM)
Material connection 2	Brass
Surface protection connection 2	Nickel-plated
Shape	Straight
Wrench width (mm)	21
With drain	No