Pisco F2SPD-X1012mm x R3/8'' Elbow Push Fit [10 Pieces]

This elbow fitting features two connection ports for joining a hose to a pipe or pneumatic component. One port is a 12 mm push-in fitting, while the other is a R3/8 male threaded fitting with Teflon coating. The fitting has a 90-degree bend from input to output and is an unequal design, meaning one port is smaller than the other. Constructed from PBT housing, polyoxymethylene (POM) connection material, and a NBR seal, this fitting is suitable for a maximum pressure of 10 bar and a temperature range of 0 – 60 °C, making it suitable for vacuum applications. The push-in fitting is easily installed by pushing the pneumatic tube against the fitting's release ring-end until it stops, securing it with the internal claw. For removal, simply push the release ring towards the fitting and pull back on the tubing. This fitting is compatible with Nylon, Polyethylene (PE), or Polyurethane (PU) tubing materials and is available in the United Kingdom.

Thread	3/8 inch
Push-in connection	12 mm
Connection type	Outer thread conical BSPT-R
Material	PBT
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0
Max pressure at 20 °C (bar)	10
Min temperature (°C)	0
Max temperature (°C)	60
Fitting features	Vacuum, With gasket
Model	1-part
Length (mm)	32.5
Material connection 1	Polyoxymethylene (POM)
Material connection 2	Brass
Surface protection connection 2	Nickel-plated
Shape	Elbow
Bend angle (°)	90
Wrench width (mm)	17
With drain	No