Pisco JKC6-01B0p4IN 6mm x OUT R1/8" Straight 0.4mm Orifice Meter-In Check Valve

This meter-in straight orifice check valve regulates one-directional air flow. Its 0.4 mm orifice allows flow in one direction and blocks it in the other. The cracking pressure is 0.5 bar. The meter-in configuration means flow is controlled from the male threaded port to the push-in fitting port. The push-in fitting on one end facilitates connection to tubing, while the R 1/8 inch male threaded port is on the other end. Flow measurement occurs from the push-in fitting port to the male threaded port. Operating pressure ranges from 1 to 9 bar (14.5 to 130.5 psi). NBR seals make it suitable for temperatures from 0 to 60°C (32 to 140 °F) (avoid freezing). Available in the United Kingdom.

Thread	1/8 inch
Push-in connection	6 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	0.4
Wrench width (mm)	10