Pisco JKC6-01B1p5IN 6mm x OUT R1/8" Straight 1.5mm Orifice Meter-In Check Valve

The Pisco meter-in straight orifice check valve controls airflow in one direction. Its 1.5 mm orifice restricts flow in one direction but opens in the opposite direction for unimpeded flow. The cracking pressure is 0.5 bar. The meter-in configuration affects flow from the male threaded port to the push-in fitting port. It has a 6 mm push-in fitting on one side and an R 1/8 inch male threaded port on the other. The push-in fitting simplifies tubing connection by using stainless steel claws to secure the tube. Flow is metered from the push-in fitting port to the male threaded port. The operating pressure range is 1 to 9 bar (14.5 to 130.5 psi). NBR seals enable operation in temperatures from 0 to 60°C (32 to 140 °F), excluding freezing conditions. This product is available in the United Kingdom.

Thread	1/8 inch
Push-in connection	6 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	1.5
Wrench width (mm)	10