Pisco JKL6-01B0p8IN 6mm x OUT R1/8" Angled 0.8mm Orifice Meter-In Check Valve

This meter-in elbow orifice check valve allows air flow control in one direction. With a 0.8 mm orifice, it obstructs flow in one direction and opens for free flow in the other. Its cracking pressure is 0.5 bar. The flow is controlled from the male threaded port to the push-in fitting port. It has a 6 mm push-in fitting on one side and an R 1/8 inch male threaded port on the other. The push-in fitting secures the tubing with stainless steel claws. Flow is metered from the push-in fitting port to the male threaded port. Operating pressure ranges from 1 to 9 bar (14.5 to 130.5 psi), and NBR seals make it suitable for applications within a temperature range from 0 to 60°C (32 to 140 °F), excluding freezing conditions. This product is available in the United Kingdom.

Thread	1/8 inch
Push-in connection	6 mm
Connection type	Outer thread conical BSPT-R, Push-in
Material	Brass
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0.5
Max pressure at 20 °C (bar)	9
Min temperature (°C)	0
Max temperature (°C)	60
Diaphragm material	NBR (nitrile rubber)
Restricting orifice diameter (mm)	0.8
Wrench width (mm)	10