This pneumatic elbow needle valve is designed for flow regulation and air control. On one end is a 5/16" push-in fitting for effortless tubing connection, while the other end has an R 1/8" male threaded port. It can withstand a maximum pressure of 9 bar (130.5 psi) and vacuum applications down to -1 bar (-14.5 psi). NBR seals allow operation within a temperature range of 0 to 60°C (32 to 140 °F). Adjust the flow rate by rotating the needle and locking it with a nut. Turn clockwise to decrease and counterclockwise to increase the flow. Start from the closed position to prevent sudden actuator movement. Excessive torque should be avoided to maintain valve seat integrity. Available in the United Kingdom.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
choosing a selection results in a full page refresh
press the space key then arrow keys to make a selection
One or more of the items in your cart is a recurring or deferred purchase. By continuing, I agree to the cancellation policy and authorize you to charge my payment method at the prices, frequency and dates listed on this page until my order is fulfilled or I cancel, if permitted.
