Pisco JSC12-04B12mm - R1/2" Meter-In Elbow Flow Control Valve

The Pisco one-directional adjustable flow control valve combines a needle valve and orifice check valve to precisely regulate air flow. Meter-in configuration adjusts flow from the push-in fitting to the male threaded port. The 12 mm push-in fitting ensures easy tubing connection with stainless steel claws. Operating pressure ranges from 1 to 9 bar, and NBR seals allow operation within 0 to 60°C. Adjust flow rate by rotating the needle, locking it with a locknut. For optimal performance, start adjustment from a closed state and avoid excessive torque. This valve is available in the United Kingdom.

Connection size	1/2 inch
Connection type	Outer thread conical BSPT-R, Push-in
Push-in connection	12 mm
Material	Brass
Seal material	NBR (nitrile rubber)
Max pressure difference at 20 °C (bar)	9
Vacuum (bar)	0
Min temperature (°C)	0
Max temperature (°C)	60
Valve bore (mm)	0
Wrench width (mm)	0
Min pressure difference (bar)	0.5
Diaphragm material	NBR (nitrile rubber)