Pisco PL6-01-106mm x R1/8'' Elbow Push Fit [10 pieces]

This Pisco elbow fitting offers two connection ports for connecting a hose to a pipe or pneumatic component. The first port features a 6 mm push-in fitting, while the second boasts a R1/8 male threaded fitting shielded with a Teflon coating. With a 90-degree bend from input to output, this fitting exhibits an unequal design, with one port smaller than the other. Constructed with a PBT housing, POM connection material, and an NBR seal, this fitting can withstand a maximum pressure of 10 bar and operates within a temperature range of 0 to 60 °C, making it suitable for vacuum applications. Installing the push-in fitting is effortless; simply push the pneumatic tube against its release ring-end until it stops, and the internal claw will secure it. To disconnect, push the release ring towards the fitting and pull back the tubing. Compatible with Nylon, Polyethylene (PE), or Polyurethane (PU) tubing materials, this elbow fitting is sold in value packs of 10 and is available in the United Kingdom.

Thread	1/8 inch
Push-in connection	6 mm
Connection type	Outer thread conical BSPT-R
Material	PBT
Seal material	NBR (nitrile rubber)
Min pressure (bar)	0
Min pressure difference (bar)	0
Max pressure at 20 °C (bar)	10
Min temperature (°C)	0
Max temperature (°C)	60
Fitting features	Vacuum, With gasket
Model	1-part
Bend radius (mm)	0
Length (mm)	22.5
Material connection 1	Polyoxymethylene (POM)
Material connection 2	Brass
Surface protection connection 2	Nickel-plated
Shape	Elbow
Bend angle (°)	90
Wrench width (mm)	10
With drain	No